Australian-listed Aldoro Resources is considering establishing a rare earth and strontium processing plant near Walvis Bay after independent metallurgical tests confirmed that seawater could be used to extract minerals from its Kameelburg project without relying on scarce inland freshwater supplies.
The proposed facility would process mineral material transported by rail from Kameelburg, allowing the company to separate mining and preliminary processing operations from water-intensive chemical treatment.
Aldoro said ALS Metallurgy in Perth had independently validated its proprietary seawater leaching method, achieving 71.9% total rare earth extraction and 92.5% strontium extraction under ambient conditions.
The results were comparable to earlier freshwater tests, which achieved 69.1% rare earth extraction and 98.9% strontium extraction.
More significantly, the seawater process reduced the proportion of barium dissolved during leaching from 58% to 8.9%, an approximately 85% reduction that could improve the purity of the strontium carbonate produced.
The company said the results could substantially change the development approach for Kameelburg by reducing the need for freshwater infrastructure, desalination facilities and long-distance transport of chemical reagents.
Aldoro has instructed SLR Consulting to incorporate the proposed coastal processing arrangement into the ongoing Kameelburg Scoping Study.
The concept remains preliminary, with its commercial viability, capital requirements and environmental approvals still to be determined.
Under the proposed development arrangement, Kameelburg would accommodate open-pit mining, crushing and dry magnetic separation, requiring relatively little water.
The upgraded non-magnetic material containing rare earths and strontium would then be transported along existing railway infrastructure to a proposed hydrometallurgical processing facility near Walvis Bay.
At the coastal plant, the material would undergo fine grinding, seawater-based leaching, impurity removal and further processing to produce mixed rare earth carbonate and strontium carbonate.
A separate iron-niobium product stream could be developed at the mine site, with future low-water-intensity niobium processing also under consideration.
Aldoro said locating chemical processing near the port would provide direct access to Atlantic seawater, bulk reagent imports and export shipping facilities.
It could also eliminate the need to construct extensive freshwater pipelines or desalination infrastructure to support inland processing.
The company said the arrangement would reduce the requirement to transport and store hydrochloric acid at the mine site, although acid would still be required for the coastal processing operation.
The proposed development would therefore comprise two processing locations supporting three potential product streams: mixed rare earth carbonate, strontium carbonate and an iron-niobium product.
However, the company cautioned that the locations, processing arrangements and potential products remain conceptual and subject to further engineering, economic assessment and regulatory approvals.
The latest metallurgical work builds on Aldoro’s earlier freshwater leaching studies announced in April and June 2026, as well as its 9 November announcement confirming the production of mixed rare earth carbonate and strontium carbonate end-products.
ALS conducted the seawater tests using mineral material from Kameelburg diamond drillhole DD004D and natural seawater collected from the Western Australian coast.
The tests used approximately 10% hydrochloric acid under ambient conditions, without external heating.
Rare earth extraction reached 71.9%, compared with 69.1% using freshwater, while strontium extraction reached 92.5%, against 98.9% in the earlier freshwater test.
The seawater process required 514 kilogrammes of hydrochloric acid per tonne of feed, compared with 503 kilogrammes under the freshwater test conditions.
Aldoro said naturally occurring sulphate in seawater caused much of the dissolved barium to precipitate into the solid residue rather than remain in the processing solution.
This reduced barium contamination, which had previously presented a challenge in producing higher-purity strontium carbonate.
The company believes the results could improve downstream product quality while preserving commercially relevant mineral extraction levels.
Aldoro executive chairperson Quinn Li said the findings addressed one of the principal constraints facing mineral developments in Namibia’s arid environment.
“Across the global rare earth and strontium sector, mineral processing has traditionally remained bound to freshwater supply. Leveraging Kameelburg’s rare acid-soluble carbonate mineralogy, Aldoro conceived and developed this leaching methodology using raw seawater entirely in-house, now independently validated by ALS with no publicly disclosed precedent among operating rare earth and strontium producers—turning arid Namibia’s toughest resource constraint into a decisive strategic advantage.
“Proving that raw seawater leaches rare earths just as effectively as freshwater while stripping out 85% of dissolved barium lets us build Kameelburg around a practical dual-site, triple-product model. The proposed placement of our wet chemical plant at Walvis Bay right next to ocean water, bulk reagent imports, and export shipping—connected by rail to dry magnetic separation at the mine—strips out potential major delays of water infrastructure development and reduces heavy capital spend, while keeping the mine site focused on Fe-Nb recovery and future low-water niobium processing. With SLR already building this layout into our Scoping Study, we are advancing Kameelburg on a development track that conventional arid-region projects simply cannot match.”
Aldoro said the proposed coastal processing strategy could shorten project development timelines by removing some of the engineering, water-permitting and construction requirements associated with securing freshwater for inland mineral processing.
However, the company has not yet quantified the potential capital savings or established whether the benefits would outweigh the additional costs of transporting mineral material by rail.
These questions are being assessed through the ongoing Scoping Study, which covers mining, metallurgical processing, infrastructure requirements and economic modelling.
A second independent laboratory is also conducting seawater leaching tests to determine whether the ALS results can be reproduced.
The company said those findings would be reported separately once testing is completed.
The proposed Walvis Bay facility would still require environmental, mining and processing approvals, alongside further metallurgical optimisation and engineering design.
Although the latest results strengthen Aldoro’s proposed processing pathway, no final investment decision or construction timetable has been announced.



















